| Bridge Voltage |
DC 10 V, 5 V±10% (30mA current maximum, can be used with remote sense) |
| Signal input range |
±5.0mV/V |
| Equivalent Input/TEDS |
Calibration range |
0.05mV/V - 5.0mV/V |
| Calibration precision |
Within 0.1% F.S. (when using 1m standard TEAC Ø8, 6-core shielded cable with 350Ω impedance, 10V BV and 5mV/V setting) |
| Precision |
Linearity |
Within 0.01%F.S. +1 digit (when input is 5mV/V) |
| Zero drift |
Within 0.5µV/ºC (Input conversion value) |
| Gain drift |
Within ±0.005%F.S/ºC |
| A/D conversion |
24-bit, 20000 times/second |
| Digital filter |
Select 3, 10, 30, 100, 300, 1000 Hz(−6 dB/oct) or none |
| D/A output** |
Output with same frequency as A/D conversion, isolated output, ±1–±10V output (set in 1V steps) and about 1/59000 resolution (when set to ±10 V), or 4–20mA current output and about 1/43000 resolution |
| TEDS function |
IEEE1451.4 class 2 mix mode interface |
| Indicator value |
Display range |
−99999 to 99999 |
| Decimal point |
Position selectable |
| Times displayed |
Select 4, 6, 10 or 20 times/second |
| Setting items |
Calibration settings |
Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration) |
| Function settings |
High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, low pass filter, motion detect, zero tracking, static strain, digital zero, digital offset, zone definition, hold mode, lock, minimum grid, display times, bridge voltage, digital zero limit, clear digital zero, comparison output pattern, select data output**, D/A converter**, remote sense |
| Hold functions |
Sample hold, peak hold, bottom hold, peak to peak hold, peak and bottom hold, average hold, zone definition hold (peak, bottom, peak to peak, peak and bottom, average) |
| External input and output signals |
Input |
Hold, clear, digital zero (isolated from main unit circuits using a photocoupler) |
| Output |
HI, OK, LO open collector output (isolated from main unit circuits using a photocoupler) |
| RS-485* |
A+, B–(isolated from main unit circuits using a photocoupler), TRM, SG |
| CC-Link** |
DA, DB (isolated from main unit circuits using a photocoupler), DG, SLD |
| EtherNet/IP*** |
P1, P2 |
| Power supply |
Ratings: 24V DC ±10% 7W |
| Operating temperature range |
0℃ to 40℃ |
| Storage temperature range |
–20℃ to 60℃ |
| Operating humidity range |
85% RH or less (without condensation) |
| Applicable standards |
CE marking, FCC (Class A), UL61010-1, UKCA marking |
| External dimensions (W×H×D) |
Approximately 30 mm × 85 mm × 110 mm (without protrusions) |
| Weight |
About 210 g |
