TEAC Load Cell site
TEAC Load Cell site

Specifications

Bridge Voltage DC, 2.5/10V, ±10% (30mA current maximum, remote sense can be used)
Signal input range ±3.2 mV/V
Equivalent input/TEDS Calibration range 0.3 mV/V–3.2 mV/V
Calibration precision Within 0.1% F.S. (when using a 1m standard TEAC Φ8, 4-core shielded cable with 350Ω impedance, 10V BV and 0.5mV/V or greater setting)
Precision Linearity Within 0.01% F.S. + 1 digit (when input is 1 mV/V or greater)
Zero drift Within 0.5 μV/°C (input conversion value)
Gain drift Within ±0.005% F.S./°C
A/D conversion 24-bit, 4000 times per second, 20000 times per second (fast sampling mode)
Digital filter Select 3 Hz (−6dB/oct), 10, 30, 100, 300, 1000 Hz (−12dB/oct) or none
D/A output 4000 times per second, isolated output, ±1–±10V voltage output (set in 1V steps) and about 1/59000 resolution (when set to ±10V), or 4–20mA current output and about 1/43000 resolution
TEDS function IEEE1451.4 class 2 mix mode interface
Display 320 x 240 color liquid crystal
Indicator value Display range −99999 – 99999
Decimal point Display position selectable
Times displayed Select 4, 6, 10 or 20 times/second
Displayed items Calibration settings Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration)
Function settings High limit, low limit, high high limit, low low limit, comparison mode, hysteresis, nearly zero, moving average, low pass filter, motion detect, zero tracking, static strain, digital zero, digital zero offset, zone definition, hold mode, key lock, minimum grid, display times, bridge voltage, digital zero limit, clear digital zero, comp. output pattern, comparison output control, select data output, D/A converter, remote sense
Hold functions Sample hold, peak hold, bottom hold, peak to peak hold, peak and bottom hold, average hold, zone definition hold (peak, bottom, peak to peak, peak and bottom, average)
External input and output signals Input Hold, judge, clear, digital zero, setting memory selection 1, setting memory selection 2 (isolated from main unit circuits using a photocoupler)
Output HH, HI, OK, LO, LL open collector output (isolated from main unit circuits using a photocoupler)
CC-Link* DA, DB (isolated from main unit circuits using a photocoupler), DG, SLD
RS-485** A+, B− (isolated from main unit circuits using a photocoupler), TRM, FG
Power supply AC adapter specifications Output ratings: DC 12 V, 0.8 A
Input ratings: AC 100 V – 240 V, 50/60 Hz, 0.5 A
NOTE: An AC adapter is included with the TD-700T for Japan and North America. No adapter is included for other regions.
(The included AC adapter conforms to the safety standards of Japan and North America.)
DC power supply specifications Ratings: DC 12–24 V, 9 W
Operating temperature range 0°C – 40°C
Storage temperature range −20°C – 60°C
Operating humidity range 85% RH or less (without condensation)
Applicable standards CE marking EN61326 (class A), UL61010-1, UKCA
External dimensions (W × H × D) Approximately 96 mm × 53 mm × 132 mm (without protrusions)
Weight About 300 g

*Only with CC-Link option.
**Only with RS-485 option.

  • Specifications and appearance are subject to change without notice.
  • Weight and dimensions are approximate.
  • Illustrations in this owner's manual might differ slightly from production models.

Included accessories

  • Micro driver (flat-blade)
    1
  • Input and output connector plugs
    B2L 3.50/08/180F SN BK BX
    1
    B2L 3.50/16/180F SN BK BX
    1
  • AC adapter (GPE012T)
    An AC adapter is included with the TD-700T for Japan and North America. No adapter is included for other regions.
    (The included AC adapter conforms to the safety standards of Japan and North America.)
    1
  • Panel attachment fixtures
    (already attached to unit)
    2
  • DIN rail attachment adapter
    1
  • Power input terminal bank cover
    (pre-installed on unit)
    1

Option

Following options are avilable.
Please contact TEAC or distributor for the details.

  • CC-Link option TD-700(CCL)
    CC-Link board for TD-700T
    * Factory-installed option
  • RS-485 option TD-700T(485)
    RS-485 board for TS-700T
    * Factory-installed option
Search for Load Cell