Indicator spec list of all models

Specifications	Color Graphics Digital Indicator TD-9000T	Digital Indicator TD-700T	Digital Indicator TD-260T	Signal Conditioner TD-SC1	Portable Digital Indicator TD-01Portable
Communication interface	EtherNet/IP,CC-Link,RS-232C (D-sub 9-pin), USB	CC-Link,RS-485	RS-232C	RS-485,EtherNet/IP,CC-Link
Global support (safety standard)	CE marking, FCC (Class A), UL61010-1, UKCA	CE marking EN61326 (class A), UL61010-1	Installation class I, EN61010-1 Pollution degree 2 Overvoltage category II, CE marking	CE marking, FCC (Class A), UL61010-1, UKCA	CE marking, VCCI (Class A), FCC (Class A)
Language	Japanese / English / Chinese / Korean	Japanese / English	×	×	Japanese / English
Display	4.3" color LCD (480×272)	320 x 240 color liquid crystal	14.6 mm high alphanumeric, shown by 7-segment green LED display	×	2.4" color TFT LCD
A/D conversion	24-bit, 5000 times/second, 25000 times/second	24-bit, 4000 times per second, 20000 times per second (fast sampling mode)	16-bit,100 times/sec	24-bit, 20000 times/second	1000 times/second, 24-bit
Screen	Digital load value, Waveform, Archive data, Setting	Waveform & Bar meter display function,Digital load value	Digital load value	×	Setting screens, indicator value digital display, graph display, recorded data list display, static strain display
Display range	−32000 to 32000	−99999 – 99999	−19999 to 99999	×	－99999 to 99999
Number of input channels	2	1	1	1	1
Signal input range	±3.2 mV/V	±3.2 mV/V	±3.2 mV/V	±5.0mV/V	±5.0mV/V
Bridge voltage	DC, 2.5/5/10 V, ±10% (30mA current maximum, can be used with remote sense)	DC, 2.5/10 V, ±10% (30mA current maximum, can be used with remote sense)	DC, 2.5/10V, ±10% (Current: 60mA max. Remote sensing available)	DC 10 V, 5 V±10% (30mA current maximum, can be used with remote sense)	DC, 2.5 V ±5% (30mA maximum current)
Calibration precision	Within 0.1% F.S. (when using 1m standard TEAC Ø8, 4-core shielded cable with 350Ω impedance, 10V BV and 3.0mV/V setting)	Within 0.1% F.S. (when using 1m standard TEAC Ø8, 4-core shielded cable with 350Ω impedance, 10V BV and 3.0mV/V setting)	Within 0.1% FS (at 10V for BV and 0.5mV/V or more for sensor sensitivity)	Within 0.1% F.S. (when using 1m standard TEAC Ø8, 6-core shielded cable with 350Ω impedance, 10V BV and 3.0mV/V setting)	Within 0.1% F.S. (when using a 1m standard TEAC Φ8,6-core shielded cable with 350Ω impedance, when 5mV/V)
Linearity	Within 0.01% F.S. +1 digit (when input is 3.0 mV/V)	Within 0.01% F.S. +1 digit (when input is 1 mV/V or greater)	Within 0.01% FS + and 1 digit (at an input of 1 mV/V or more)	Within 0.01% F.S. +1 digit (when input is 5.0 mV/V)	Within 0.01% F.S. + 1 digit (when 5mV/V)
TEDS function	IEEE1451.4 class 2 mix mode interface	IEEE1451.4 class 2 mix mode interface	IEEE1451.4 class 2 mix mode interface	IEEE1451.4 class 2 mix mode interface	IEEE1451.4 class 2 mix mode interface
Static strain display	〇	〇	〇	〇	〇
Disconnection detection	〇	〇	×	〇	〇
Low-pass filter	Select 3, 10, 30, 100, 300, 1000 Hz(−6 dB/oct) or Off	Select 3 Hz (−6dB/oct), 10, 30, 100, 300, 1000 Hz (−12dB/oct) or none	Selectable from 3, 10, 30, 100, 300 Hz (−12dB/oct)	Select 3, 10, 30, 100, 300, 1000 Hz(−6 dB/oct) or none	Moving average (select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048)
D/A output	Output with same frequency as A/D conversion, isolated output, ±1–±10V output (set in 1V steps) and about 1/59000 resolution (when set to ±10 V), or 4–20mA current output and about 1/43000 resolution	4000 times per second, isolated output, ±1–±10V voltage output (set in 1V steps) and about 1/59000 resolution (when set to ±10V), or 4–20mA current output and about 1/43000 resolution	0 - ±10V or 4 - 20mA	4000 times per second, isolated output, ±1–±10V voltage output (set in 1V steps) and about 1/59000 resolution (when set to ±10 V), or 4–20mA current output and about 1/43000 resolution	±2.0V
Displacement（Pulse）	Pulse type:A/B phase or A phase, differential square wave (RS-422 conformance) Maximum input frequency:2MHz Maximum count number:1500000 Power output:+5V ±10%, 500mA	×	×	×	×
Displacement（Voltage）	Input:±5.2 V Low-pass filter:10/30/100/300Hz Power output:DC 12V ±10%, 250 mA	×	×	×	×
Real-time judgments		〇	×	×	×
Band judgment	Offset reference band / Designated value band	×	×	×	×
Hold setting	Constant comparison, sampling, peak, bottom, peak to peak, maximum/minimum, inflection point and average value	Sample hold, peak hold, bottom hold, peak to peak hold, peak and bottom hold, average hold, zone definition hold (peak, bottom, peak to peak, peak and bottom, average)	Sample hold, Peak hold, Bottom hold, Peak-to-Peak hold, block-specified hold (Peak, Bottom, Peak-to-Peak)	Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom)	Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom)
External output signals	Load: HH / HI / OK / LO / LL Displacement: HI / OK / LO	HH, HI, OK, LO, LL open collector output (isolated from main unit circuits using a photocoupler)	1a contact for each relay: HH, HI, OK, LO, LL, analog voltage	HI, OK, LO open collector output (isolated from main unit circuits using a photocoupler)	×
Data Record	〇	×	×	×	△（Built-in memory）
Recording media	SD/ SDHC(2~32GB, Class 10 recommended)	×	×	×	×
Operating temperature range	0°C to 40°C	0°C to 40°C	-10°C to 40°C	0°C to 40°C	0°C to 40°C
External dimensions (W × H × D)	Approximately 114 mm × 96 mm × 140 mm (without protrusions)	Approximately 96 mm × 53 mm × 132 mm (without protrusions)	Approx. 96 mm × 96 mm × 146 mm (protrusions not included)	Approximately 30 mm × 85 mm × 110 mm (without protrusions)	Approximately 85mm × 140mm × 35mm (without protrusion)
Weight	About 960g	About 300g	Approx. 950g	About 210g	About 320g (including batteries)
Power supply	Ratings: 24V DC ±10%, 13 W	Ratings: DC 12–24 V, 9 W	100 to 240V ±10% 50 - 60Hz AC, 13W	Ratings: 24V DC ±10% 7W	4 alkaline or NiMH AA batteries, USB bus power (built-in Micro-USB B connector)