TEAC Load Cell site
24-bit/1kHz A/D conversion, Portable Digital Indicator TD-01 Portable


Compatible sensors Strain gauge transducer
Signal input terminals Round connector(NDIS7P)/terminal bank(connect only one at a time)
Excitation Voltage DC, 2.5 V ±5% (30mA maximum current)
Signal input range ±5 mV/V
D/A output ± 2V
Equivalent input/TEDS Calibration range 0.3 mV/V – 5.0 mV/V
Within 0.1% F.S. (when using a 1m standard TEAC Φ8,
6-core shielded cable with 350Ω impedance, when 5mV/V)
Precision Non-linearity Within 0.01% F.S. + 1 digit (when 5mV/V)
Zero drift Within 0.5 μV/°C (input conversion value)
Gain drift 0.005%/ºC or less
A/D conversion 1000 times/second, 24-bit
Digital filter Moving average
(select from OFF, 16, 32, 64, 128, 256, 512, 1024, 2048)
D/A output Output connector BNC
Output voltage ±2.0 V
Resolution 70.16μV typ
Non-linearity 0.02% F.S. or less
Zero drift 0.1 mV/ºC or less
Gain drift 0.003%/ºC or less
TEDS function IEEE1451.4 class 2 mix mode interface
Display Display 2.4" color TFT LCD
Display modes Setting screens, indicator value digital display, graph display,
recorded data list display, static strain display
Languages Japanese/English
Indicator value Display range -99999 to 99999
Decimal point Display position selectable
Displayed items Calibration
Zero calibration/span calibration (TEDS calibration, actual load calibration, equivalent input calibration)
Function settings High limit, low limit, comparison mode, hysteresis, nearly zero, moving average, motion detect, zero tracking, digital zero, digital zero offset, zone definition, hold mode, control lock, minimum grid, digital zero limit, clear digital zero, select data output, D/A converter
Sensor value memory Six types of calibration values for each connected sensor
Hold functions Sample hold, peak hold, bottom hold, zone definition hold (peak, bottom)
Data recording Indicator value 300 maximum
Recorded contents: ID number, date and time, recording mode, sensor value memory number, indicator value
Graph recording 8 maximum
Recorded contents: ID number, date and time, sensor value memory number, trigger mode, graph waveform
Power supply 4 alkaline or NiMH AA batteries USB bus power (built-in Micro-USB B connector)
Operating temperature range 0℃ to 40℃
Storage temperature range -20℃ to 60℃
Operating humidity range 85% RH or less (without condensation)
Applicable standards CE marking, VCCI (Class A), FCC (Class A)
External dimensions (W×H×D) Approximately 85mm × 140mm × 35mm (without protrusions)
Weight About 320 g (including batteries)

Small and Light-weight Portable type

W85×H140×D35mm (without protrusions)

Optional accessories

Carrying case (Hard) CS-TD01
Carrying case (Hard) CS-TD01
Carrying case (Hard) CS-TD01
*TD-01 Portable is put in a hard case
Carrying case (Soft) CS-TD01S
Carrying case (Soft) CS-TD01S