TEAC Load-cell site
Compression Load-cell TC series



Compact and lightweight makes it easy to install on existing equipment. In addition, since it is made of stainless steel (SUS630), it can be widely applied as a detector for devices requiring corrosion resistance

Compact, lightweight, corrosion-resistant, low-cost
Model Unit Rated.Capacity (R.C)
TC-FR(T)-G N 0.5 1 1.5 2 3 5 10 20 50 100 200 500  
kN 1 2 3 5 10 20 30 50 100 200 300 500 1000
Rated.Capacity (R.C) Resonance Frequency Weight (Approx.)
500N 51kgf 3.6kHz 230g
1kN 102kgf 5.0kHz 230g
2kN 204kgf 6.0kHz 230g
5kN 510kgf 7.0kHz 230g
10kN 1.02tf 10.0kHz 230g
20kN 2.04tf - 230g
Model TC-FR(T)-G
Safe Overload Rating 150%R.C.
Rated Output (R.O.) 2mV/V ±1%
Non-linearity 0.15%R.O.
Hysteresis 0.1%R.O.
Repeatability 0.05%R.O.
Safe Excitation Voltage 15V
Input Terminal Resistance 425Ω±50Ω
Output Terminal Resistance 350Ω±5Ω
Insulation Resistance > 1000MΩ
Compensated Temperature Range -10℃ - 70℃
Permissible Temperature Range -10℃ - 70℃
Temperature Effect on Zero Balance 0.05%R.O./10℃
Temperature Effect on Output 0.1%R.C./10℃
Cable φ6, Shielded 6-Conductor wire, Robot-cable, 5m direct connection
Material Stainless Steel
TEDS Built-in
Environmental Regulations RoHS / REACH

TC-FR(T)-G Outline Dimensions