Portable calibrator CA-20
The CA-20 directly calibrates accelerometers, on site
Piezoelectric accelerometers are widely used to analyze vibrations and diagnose the performance of rotating machinery. Checking the sensitivity of accelerometers after they have been used under harsh conditions or for a long time has usually been left to the manufacturers because of the expensive calibration equipment required.
The CA-20 integrated the exciter, amplifier and display in a single unit.
All you have to do is attach the sensor, for a speedy calibration of the sensor’s sensitivity. You will now be able to gather reliable data with confidence, any time that you need to.
- Up to 100 data can be stored in the unit of CA-20. (Sensitivity, DC bias voltage, date and time)
- Data can be transferred to PC.
- Powered by batteries or AC cable.
Directly input the sensor output, and check the sensitivity.
Use the exciter only, and calibrate the vibration measuring system.
|PE/IEPE calibration accuracy||Sensitivity 0.101 - 19.9pC(mV)/m/s2, ±(3% + 1digit)
Sensitivity 0.026 - 0.100pCpC(mV)/m/s2, ±(10% + 1digit)
|Accuracy measure to DC bias voltage||≦±1V|
|Exiciter vibration acceration||10m/s2(rms)±3%|
|Exciter vibration frequency||159.2Hz±1%|
|Calibration sensor weight||≦100g|
|Alarm over weight||Indicates "over" and Exciter is stop|
|Power supply for IEPE accelerometers||Voltage||24VDC/15VDC|
|Power requirement||AC adapter or LR6 batteries
* Continuous work is approx. 1hour by 4AA batteries
|LR6 battteriesalarm lamp||≦4.25V±0.1V|
|Storage humidity range||≦90%RH|
|Operating temperature range||+10℃ - +40℃|
|Storage temperature range||-10℃ - +50℃|
|internal data memory||100data|
|Auto power off (on/off)||approx 3 minutes|
|Sensor mount space||φ20mm, M6 female(depth 6.5mm)|