TEAC Load Cell site

FAQ

Q1 I want to investigate the failure of the load cell.

Use the static strain mode to measure the amount of strain in the no-load condition.If the amount of strain seems to be changing significantly compared to the value at the time of purchase, there is a possibility of being broken.

※It can be confirmed by the static distortion display function of TD - 700T, TD - 01 Portable.

Q2 Please tell me the color of the load cell wiring.

The color of wiring varies depending on the manufacturer.The color of TEAC's wiring is as follows.

*TEDS compatible products
Red RedEXC(+)
Black BlackSIG(-)
Blue BlueEXC(-)
White WhiteSIG(+)
Orange OrangeSENS/TEDS (+) *
Green GreenSENS/GND(COM) *
Yellow YellowSHIELD

Q3 RoHS compatible products?

Use the static strain mode to measure the amount of strain in the no-load condition.If the amount of strain seems to be changing significantly compared to the value at the time of purchase, there is a possibility of being broken.

For TEDS compliant products, "(T)" is indicated in the model name.
For RoHS compatible products, "- (G)" is indicated in the model name.

型番について

Q4 What is the output signal from the amplifier?(TD-700T)

TD-700T has D / A output (voltage: maximum 0 V to 10 V or current: 4 mA to 20 mA) function.

TD-01P can achieve analog output that corresponds to the unit indicator value as voltage output within ±2V.

Q5 Conversion speed of D / A output?(TD-700T/TD-01P)

4000 times / sec high-speed processing .(TD-700T)

1000 times / sec high-speed processing .(TD-01P)

Q6 What is Static strain display?(TD-700T/TD-01P)

Allows the measure static strain. This function makes it easier to check load-cells for deterioration and plastic deformation.